|
|
|
BCP-510
Broadband Current Probe
20 Hz - 1 MHz
This current probe measures currents on 50 Hz, 60 Hz and 400 Hz powerlines. The BCP-510 current probes have a usable frequency range of 20 Hz - 1 MHz. |
larger image
|
| Frequency Range: |
20 Hz - 1 MHz |
| Transfer Impedance (dBW) |
-56 to -30 |
| Max Cont. Current (Amps) |
100 |
| Connector: |
BNC-Type, Female |
| Physical Dimensions |
|
| Aperture: |
1.2" (32 mm) |
| Diameter: |
3.9" (98 mm) |
| Weight: |
1.7 lb.'s (771 grams) |
Features
- Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
- Individually Calibrated (Transfer Impedance calibration included)
- Split Type Clamp-on Design
- Three Year Warranty
|
Conducted currents can be measured without making direct contact with the
source conductor or metallic surface by means of clamp-on current probes.
The BCP-519 Current Probe is designed to permit field intensity meters, spectrum
analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes
of current. Measurements can be made on single and multi-conductor cables, ground
and bonding straps, shielded conduits and on coaxial cables.
Conducted currents can be measured without making direct contact with the source conductor
or metallic surface by means of clamp-on current probes. The BCP-510 low frequency current
probe has a flat transfer impedance of 0.12 ohms (± 2 dB) from 100 Hz to 1 MHz and is an
ideal solution for low frequency conducted emissions testing.
Recommended Accessories
- CPF-530 (Current Probe Fixture)
- SAC-212 (3 meter BNC/N Cable, RG-58A/U
More Information
To download Adobe's free Acrobat Reader software,
click the Get Acrobat Reader button below.
|
251Kb)
