Tuned Dipole Antenna FCC-2

  • Tuned Dipole Antenna

Description

Designed per the FCC specitications, this Tuned Dipole antenna is ideal for site attenuation measurements.

Features

  • 65 MHz to 180 MHz
  • Individually Calibrated
  • FCC, MIL-STD, VDE and TEMPEST Testing
  • Rugged Construction
  • Three Year Warranty
  • Low Loss, Low VSWR

CAGE Code: 54656
NSN: 5985-01-598-9568
Schedule B: 8529.10.9000
ECCN: EAR 99


Currently In Stock

Product Details

A.H. Systems' FCC-2 half-wave dipole antenna provides an accurate standard for precise EMI and site attenuation measurements (per OET-55 and ANSI C63.5). The FCC-2 is manufactured per the FCC balun design and individually calibrated.


Antenna Specifications

FCC-2 Tuned Dipole Antenna

Frequency Range: 65 MHz - 180 MHz
Balun Loss: <0.5 dB
Antenna Factor: 5 to 14 dB/m
Gain: 0 to 2 dBi
Maximum Continuous Power: 200 Watts
Impedance: 50 ohm
Connector: N-Type, Female
Physical Dimensions
Length: 21.7 in.
Weight: 0.7 lb.'s
Supplied Accessories
One balun mounting clamp with 1/4-20 threads
Two Telescoping Elements
One Tape Measure

Typical Antenna Data

FCC-2 Tuned Dipole Antenna

Additional Resources

FCC-2 Tuned Dipole Antenna

Product Datasheet

Tuned Element Lengths




Shipping Information:
Carton size: 25" x 13" x 13"
Shipping Weight: 5 lbs.
* These are approximate dimensions and will vary depending on other items ordered.

Recommended Accessories

FCC-2 Tuned Dipole Antenna
31 dB Preamplifier

PAM-0202 - 31 dB Preamplifier

With at least 30dB of gain, this preamplifier will improve overall system sensitivity. Designed to meet the needs of your various testing requirements.

more...

Plastic Tripod

ATU-514 - Plastic Tripod

The ATU-514 is a collapsible tripod is built with all non-metallic materials that will not influence your antenna measurements.

more...

Az and El Head

AEH-510 - Az and El Head

The AEH-510 Azimuth and Elevation head is used to assist the test engineer in pointing the mounted test antenna towards the device under test. This adjustable antenna mount has a rugged 4" mounting surface with a Captive 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas.

more...

Tripod Carrying Case

TCC-510 - Tripod Carrying Case

The tripod carring case is a poly tube that will house the ATU-510 with the WEL-510 and AEH or the ATU-514 tripods.

more...

3 Meter N/N Cable

SAC-213 - 3 Meter N/N Cable

3 Meter RF cable with N(m) to N(m) connectors. Custom lengths can be made to suit your specifications.

more...