|
|
|
ICP-521
Injection Current Probe
10 KHz - 100 MHz
This low frequency injection current probe can be used as pulse injection source as well as a sensitive monitoring probe. |
larger image
|
| Frequency Range: |
10 KHz - 100 MHz |
| Insertion Loss (dB) |
12 to 33 |
| Transfer Impedance (dBW) |
0 to 22 |
| Max Cont. Current (Amps) |
100 |
| Connector: |
N-Type, Female |
| Physical Dimensions |
|
| Aperture: |
1.6" (40 mm) |
| Diameter: |
5" (127 mm) |
| Weight: |
6.5 lb.'s (2.95 kg) |
Features
- Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
- Individually Calibrated (Transfer Impedance calibration included)
- Split Type Clamp-on Design
|
The ICP-521 Injection Current Probe is used to inductively couple large RF currents
into conductors passing through it’s aperture. The conductors are signal, control
and power circuits of equipment under test for conducted susceptibility or immunity.
This low frequency injection current probe can be used as pulse injection source as
well as a sensitive monitoring probe. This probe can inductively couple transients
having risetimes as short as 5 nanoseconds and a half pulse width duration of 100
microseconds. When used as a monitor probe, this injection probe has a useable
frequency range of 10 KHz to 200 MHz. The VSWR from 200 KHz to 50 MHz is typically
less than 4:1. This very low input VSWR minimizes the power being reflected. The
ICP-521 has an input power rating of 100 watts CW for 30 minutes.
Recommended Accessories
More Information
To download Adobe's free Acrobat Reader software,
click the Get Acrobat Reader button below.
|
251Kb)
