Standard Gain Horn Antenna SAS-581

  • Standard Gain Horn Antenna

Description

This Standard gain horn antenna has medium gain, low VSWR, and a constant antenna factor; excellent for both immunity and emissions testing.

Features

  • 1.7 GHz to 2.6 GHz
  • Individually Calibrated
  • FCC, MIL-STD, VDE and TEMPEST Testing
  • Rugged Construction
  • Three Year Warranty

CAGE Code: 54656
Schedule B: 8529.10.9000
ECCN: EAR 99


Currently In Stock

Product Details

The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- .5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with 1/4-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.


Antenna Specifications

SAS-581 Standard Gain Horn Antenna
Frequency Range: 1.70 GHz - 2.60 GHz
Antenna Factor: 22.1 dB/m
Gain: 14.5 dBi
Maximum Continuous Power: 500 W
Max Radiated Field: 650 V/m
Beamwidth E-plane: 28°
Beamwidth H-plane: 29°
Impedance: 50 ohm
VSWR: 1.3:1 (1.6:1 max)
Connector: WR-430 to N-Type female adapter
Physical Dimensions:
Length: 27.0 in.   (68.6 cm)
Width: 8.5 in.   (21.6 cm)
Height: 11.8 in.   (30 cm)
Weight: 10.5 lbs. (4.76 kg)

Typical Antenna Data

SAS-581 Standard Gain Horn Antenna

Additional Resources

SAS-581 Standard Gain Horn Antenna

Product Datasheet

SAS-581 E-Plane Beamwidth Patterns

SAS-581 H-Plane Beamwidth Patterns

Operation Manual




Shipping Information:
Carton size: 33" x 12" x 25"
Shipping Weight: 20 lbs.
* These are approximate dimensions and will vary depending on other items ordered.

Recommended Accessories

SAS-581 Standard Gain Horn Antenna
Wooden Tripod

ATU-510 - Wooden Tripod

The ATU-510 wooded Tripod comes with a spring loaded 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas. This wood tripod can hold up to 30 lbs. (13.6 Kg). Each wooden leg is adjustable independently of each other. They can adjust from 38" in length to 63" and locked up to a 90-degree angle, allowing an infinite number of settings.

more...

Az and El Head

AEH-510 - Az and El Head

The AEH-510 Azimuth and Elevation head is used to assist the test engineer in pointing the mounted test antenna towards the device under test. This adjustable antenna mount has a rugged 4" mounting surface with a Captive 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas.

more...