|
|
|
SAS-584 Standard Gain Horn Antenna
(image available here)
| Frequency Range: |
5.85 GHz - 8.20 GHz |
| Antenna Factor (1 meter) |
32.2 dB/m |
| Gain |
14.8 dBi |
| Beamwidth E-plane |
30° |
| Beamwidth H-plane |
29° |
| Maximum Continuous Power: |
250 Watts |
| Max Radiated Field: |
500 V/m |
| Connector: |
WR-137 to N-Type female adapter |
| Mounting Base: |
¼ - 20 Thread, female |
| Physical Dimensions: |
| Length: |
8.6 in. (21.8 cm) |
| Width: |
2.6 in. (6.6 cm) |
| Height: |
3.5 in. (8.89 cm) |
| Weight: |
1.1 lbs. (0.5 kg) |
| Features
Frequency Range of 5.95 GHz to 8.20 GHz
Receive and Transmit
Linearly Polarized
FCC, MIL-STD, VDE and TEMPEST Testing
1 Meter calibration included, horizontal polarization
|
The Standard Gain Horn Antennas are designed specifically for
utilization in emissions and immunity testing over the
frequency range of 1 to 40 GHz. Each antenna is linearly
polarized and has medium gain, low VSWR, and a constant
antenna factor. The Standard Gain Horn performance is very
precise and predictable through design parameters.
Comparisons of measured versus computed antenna factors and
gain have been shown to be +/- .5 dB. Therefore, the antenna
is considered to be a standard reference, similar to that of
a resonant dipole below 1 GHz. The coax-to-waveguide adapter
is the only power-limiting component on the antenna and can
be removed if high fields are desired. Each Standard Gain
Horn comes with a tripod mount that adapts to any tripod with
¼-20 male threads. Horizontal and vertical
polarization is obtained by rotating the antenna on the
tripod.
Recommended Accessories
More Information
To download Adobe's free Acrobat Reader software,
click the Get Acrobat Reader button below.
|
1.3 Mb)
