Low Frequency Current Probe BCP-610

  • Broadband Current Probe


This current probe measures currents on 50 Hz, 60 Hz and 400 Hz powerlines and has a usable frequency range of 20 Hz - 20 MHz.


  • 20 Hz to 20 MHz
  • Individually Calibrated
  • Split Type Clamp-on Design
  • Suitable for CISPR 16-2-1, CISPR 22 and CISPR 32 and MIL STD-461
  • Three Year Warranty

CAGE Code: 54656
Schedule B: 8529.10.9000

Product Details

Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-610 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits and on coaxial cables. A current probe acts as a single turn primary, multiple turn secondary transformer, placing low series impedance in the probed power line or signal lead while capable of driving a usable signal into a 50ohm receiver. A current probe is characterized by its transfer impedance, ZT (dBohm) the ratio of output voltage into a standard load (usually 50ohm for EMI testing) divided by the net current traveling through the probe window area.

For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small and lightweight, each Current Probe is manufactured to exacting standards, thus insuring repeatable performance.

Current Probe Specifications

BCP-610 Current Probe
Frequency Range: 20 Hz - 20 MHz
Transfer Impedance (dBohm) -63 to -28
Max Primary Current
(DC - 60 Hz)
800 Amps
Max Primary Current
(400 Hz)
400 Amps
Max Primary Current CW 220 Amps
Peak Pulse Current 5,000 Amps
Connector: N-Type, Female
Physical Dimensions
Aperture: 1.25" (32 mm)
Weight: 1.4 lb.'s (0.65 Kg)

Typical Current Probe Data

BCP-610 Current Probe

Additional Resources

BCP-610 Current Probe

Product Datasheet

Operation Manual

Current Probe Comparisons

A Basic Bulk Current Injection Test Method

Shipping Information:
Carton size: 13" x 10" x 5"
Shipping Weight: 3 lbs.
* These are approximate dimensions and will vary depending on other items ordered.

Recommended Accessories

BCP-610 Current Probe
Current Probe Fixture

CPF-630 - Current Probe Fixture

Injection Probe calibration fixtures are a part of the test equipment required by most of the Bulk current Injection Test Procedure Specifications. The Calibration Fixture allows the user to quickly and easily calibrate the injection probe prior to performing the compliance testing. It exceeds DO-160, Section 20 VSWR fixture requirements for stand-alone injection probe calibration fixture.


3 Meter N/N Cable

SAC-213 - 3 Meter N/N Cable

3 Meter RF cable with N(m) to N(m) connectors. Custom lengths can be made to suit your specifications.


Carrying case

TSC-BCP-1 - Carrying case

Rugged polyethylene case that includes a custom foam cutout for the current probes.