Tuned Dipole Antenna FCC-1
Description
Designed per the FCC specitications, this Tuned Dipole antenna is ideal for site attenuation measurements.
Features
- 25 MHz to 70 MHz
- Individually Calibrated
- FCC, MIL-STD, VDE Testing
- Rugged Construction
- Three Year Warranty
CAGE Code: 54656
NSN: 5985-01-598-9561
Schedule B: 8529.10.9000
ECCN: EAR 99
Share Product:
Product Details
A.H. Systems FCC-1 half-wave dipole antenna, also know as the reference dipole antenna, is the simplest form of antenna and consists of a matching balun and two horizontal elements. Our FCC-1 tuned dipole antenna includes a mounting clamp, tape measure, extension elements and adjustable telescoping elements. Each antenna element is adjusted to a quarter wavelength (half wavelength total) this will create a precise resonating response at the frequency of interest.
The antenna balun is constructed per the W. K. Roberts design as specified in the ANSI C63.5 standard and consists of a folded balun that converts the 70-ohm (at resonance) to 50-ohm impedance. This balun design exhibits a low VSWR, low balun loss and can handle power up to 300 watts.
Half-wave tuned dipole antenna showing
quarter wavelength element with respect to a wavelength.
- Included parts:
- FCC-1 Antenna Balun
- 2 removeable telescoping elements
- 4 extension elements
- Tape measure, Inch/Metric
- ABC-TD, Balun Clamp with 1/4-20 thread
- Antenna Calibration Manual
Antenna Specifications
FCC-1 Tuned Dipole Antenna| Frequency Range: | 25 MHz - 70 MHz |
| Balun Loss: | <0.5 dB |
| Antenna Factor: | -3 to 6 dB/m |
| Gain: | -5 to 2 dBi |
| Maximum Continuous Power: | 300 Watts |
| Impedance: | 50 ohm |
| Connector: | N-Type, Female |
| Physical Dimensions | |
| Length: | 23.7 in. |
| Weight: | 1.2 lb.'s |
| Supplied Accessories | |
| One balun mounting clamp with 1/4-20 threads | |
| Four Extension Elements | |
| Two Telescoping Elements | |
| One Tape Measure | |
Typical Antenna Data
FCC-1 Tuned Dipole Antenna
Additional Resources
FCC-1 Tuned Dipole AntennaFrequency to Wavelength Calculator
Carton size: 25" x 13" x 13"
Shipping Weight: 5 lbs.
* These are approximate dimensions and will vary depending on other items ordered.
Recommended Accessories
FCC-1 Tuned Dipole Antenna
PAM-0202 - 31 dB Preamplifier
With at least 30dB of gain, this preamplifier will improve overall system sensitivity. Designed to meet the needs of your various testing requirements.
ATU-514 - Plastic Tripod
The ATU-514 is a collapsible tripod is built with all non-metallic materials that will not influence your antenna measurements.
AEH-510 - Az and El Head
The AEH-510 Azimuth and Elevation head is used to assist the test engineer in pointing the mounted test antenna towards the device under test. This adjustable antenna mount has a rugged 4" mounting surface with a Captive 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas.
TCC-511 - Tripod Carrying Case
Soft tripod carrying case to house and protect any of the tripods and extension legs that we offer.
SAC-213 - 3 Meter N/N Cable
3 Meter RF cable with N(m) to N(m) connectors. Custom lengths can be made to suit your specifications.
RELATED PRODUCTS
Check our other products that are related.
