Preamplifier PAM-0204
Description
With at least 22dB of gain, this preamplifier will improve overall system sensitivity. Designed to meet the needs of your various testing requirements.
Features
- 20 MHz to 4 GHz
- Individually Calibrated
- FCC, MIL-STD, VDE and TEMPEST Testing
- Rugged Construction
CAGE Code: 54656
ECCN: EAR 99
Share Product:
Product Details
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB. All of A.H. Systems' Preamplifiers come with a 12-volt DC regulated power source. A low voltage indicator confidently allows you to power the amplifier with your own external 12-volt DC battery. This makes it a convenient choice for field measurements. See table above for amplifier specifications.
Specifications
PAM-0204 Preamplifier| Frequency Range | 20 MHz - 4000 MHz |
| Gain (typical) | 26 dB |
| Gain (minimum) | 22 dB |
| Noise Figure | 4.5 dB |
| Flatness | +/- 5.0 dB |
| Maximum Power (dBm) @ 1 dB compression |
+ 15 dBm |
| Input VSWR | less than 1.7:1 |
| Output VSWR | less than 2.0:1 |
| Input Power | 100/220 VAC regulated P/S output: 12 V DC 170 mA |
| Connectors | N(f) to N(f) |
| Physical Dimensions: | |
| Height: | 2.5" / 63mm |
| Width: | 3.75" / 95mm |
| Length: | 6.25" / 158mm |
| Weight: | 1.1 lbs. / 0.5 kg |
Typical Antenna Data
PAM-0204 Preamplifier
Additional Resources
PAM-0204 PreamplifierBoosting Weak Emissions Measurements
Make Smart Use Of Preamps In RF Testing
Carton size: 13" x 10" x 7"
Shipping Weight: 3 lbs.
* These are approximate dimensions and will vary depending on other items ordered.
Recommended Accessories
PAM-0204 Preamplifier
SAC-211 - 3 Meter N/N Cable
3 Meter RF cable with N(m) to N(m) connectors. Custom lengths can be made to suit your specifications.
SAC-211-0.5 - 0.5 Meter N/N Cable
0.5 Meter RF cable with N(m) to N(m) connectors. Custom lengths can be made to suit your specifications.
TSC-PAM - Carrying case for Preamplifier
Rugged polyethylene case that includes a custom foam cutout for the preamplifier.
RELATED PRODUCTS
Check our other products that are related.
