Dipole Antenna SAS-530H

  • Dipole Antenna


This Broadband Dipole Antenna is an ideal omni-directional high frequency dipole.


  • 160 MHz to 500 MHz
  • Individually Calibrated
  • FCC, MIL-STD, VDE and TEMPEST Testing
  • Rugged Construction
  • Three Year Warranty

CAGE Code: 54656
NSN: 5985-01-599-4063
Schedule B: 8529.10.9000

Product Details

The A.H. Systems' Broadband Dipole Antenna operates efficiently over the frequency range of 160 MHz to 500 MHz. Suitable for FCC, MIL-STD, VDE, TEMPEST, and immunity testing, this antenna will provide reliable, repeatable measurements. Whether testing outdoors, or in a shielded enclosure, the rugged construction of the Broadband Dipole makes it suitable for all conditions.

Included parts:
  • SAS-530H Antenna Balun
  • 2 removeable elements
  • ABC-B, Balun Clamp with 1/4-20 thread
  • Antenna Calibration Manual

* Calibration data and certificate at 1, 3 and 10 meter horizontal polarity included

Antenna Specifications

SAS-530H Dipole Antenna

Frequency Range: 160 MHz - 500 MHz
Antenna Factor: 15 to 25 dB/m
Gain: -4 to 2.5 dBi
Maximum Continuous Power: 300 Watts
Impedance: 50 ohm
Max Radiated Field: 50 V/m
Connector: N-Type, female
Mounting Base: 1/4 - 20 Thread, female
Physical Dimensions:
Height: 21 in. (53.3 cm)
Width: 24 in. (61 cm)
Weight: 2.5 lbs. (1.13 kg)

Typical Antenna Data

SAS-530H Dipole Antenna

Additional Resources

SAS-530H Dipole Antenna

Product Datasheet

Shipping Information:
Carton size: 25" x 13" x 13"
Shipping Weight: 7 lbs.
* These are approximate dimensions and will vary depending on other items ordered.

Recommended Accessories

SAS-530H Dipole Antenna
Wooden Tripod

ATU-510 - Wooden Tripod

The ATU-510 wooded Tripod comes with a spring loaded 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas. This wood tripod can hold up to 30 lbs. (13.6 Kg). Each wooden leg is adjustable independently of each other. They can adjust from 38" in length to 63" and locked up to a 90-degree angle, allowing an infinite number of settings.


Az and El Head

AEH-510 - Az and El Head

The AEH-510 Azimuth and Elevation head is used to assist the test engineer in pointing the mounted test antenna towards the device under test. This adjustable antenna mount has a rugged 4" mounting surface with a Captive 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas.


3 Meter N/N Cable

SAC-213 - 3 Meter N/N Cable

3 Meter RF cable with N(m) to N(m) connectors. Custom lengths can be made to suit your specifications.