Passive Monopole Antenna SAS-551
Description
Passive monopole for transmitting from 9 KHz - 40 MHz
Features
- 9 KHz to 40 MHz
- Individually Calibrated
- FCC, MIL-STD, VDE and TEMPEST Testing
- Rugged Construction
- Three Year Warranty
CAGE Code: 54656
NSN: 5985-01-599-4070
Schedule B: 8529.10.9000
ECCN: EAR 99
Share Product:
Product Details
A.H. Systems' Passive Monopole Antenna provides superior performance in electric field measurements. The Passive Monopole Antenna is used for transmitting to perform shielding effectiveness and immunity testing.
- Included parts:
- SAS-551 Antenna Base with ground plane
- Telescoping Antenna Element
- Antenna Calibration Manual
* Calibration data and certificate included.
Antenna Specifications
SAS-551 Passive Monopole Antenna| Frequency Range: | 9 KHz - 40 MHz |
| Impedance: | 50 ohm |
| Connector: | BNC-Type, female |
| Mounting Base: | ¼ - 20 Thread, female |
| Physical Dimensions: | |
| Ground Plane Dimensions: | 18 in. X 18 in. |
| Rod Length: | 8.5 in. - 43 in. |
| Weight: | 3.5 lbs. |
Typical Antenna Data
SAS-551 Passive Monopole Antenna
Additional Resources
SAS-551 Passive Monopole AntennaShielding Effectivness Test Guide
Carton size: 21" x 21" x 5"
Shipping Weight: 8 lbs.
* These are approximate dimensions and will vary depending on other items ordered.
Recommended Accessories
SAS-551 Passive Monopole Antenna
ATU-510 - Wooden Tripod
The ATU-510 wooded Tripod comes with a spring loaded 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas. This wood tripod can hold up to 30 lbs. (13.6 Kg). Each wooden leg is adjustable independently of each other. They can adjust from 38" in length to 63" and locked up to a 90-degree angle, allowing an infinite number of settings.
SAC-210 - 3 Meter BNC/BNC Cable
Our Standard RF cables are assembled to meet the needs of any Test lab.
SAC-212 - 3 Meter BNC/N Cable
Our custom made microwave/RF cable assemblies provide repeatable, reliable performance for use in a variety of commercial and industrial applications.
ECSM Fixture - ECSM Fixture
The ECSM capacitance fixture kit used for system checks and calibration of the active monopole antennas. One of the functions of the matching network is to convert the high impedance input of the antenna element to the 50 ohm impedance of the measurement receiver. The 10 pF capacitor ensures that the correct source impedance is present during the check.
RELATED PRODUCTS
Check our other products that are related.
