Tuned Dipole Set TDS-535

  • tuned dipole antenna set tuned dipole antenna set


This Tuned Dipole Set will provide reliable, repeatable measurements. An ideal solution and a standard workhorse of any EMC test house for compliance testing.


  • 25 MHz to 1 GHz
  • Individually Calibrated
  • FCC, MIL-STD, VDE Testing
  • Rugged Construction
  • Low Loss, Low VSWR

CAGE Code: 54656
Schedule B: 8529.10.9000

Product Details

Model TDS-535 Tuned Dipole Set provides an accurate standard for precise EMI and site attenuation measurements (per OET-55 and ANSI C63.5). Our half wave Dipole Set is manufactured per the FCC balun design and is individually calibrated per ANSI C63.5 at 3 and 10 Meters. This Tuned Dipole Set should be considered as a standard reference for frequencies below 1000 MHz. All Sets come contained in a rugged, lightweight storage case and includes four Baluns, Element extension rods, telescoping Elements, 10 Meter Cable, Tape Measure and a Clamp for tripod mounting. Two Dipole Sets in one case is available as an option (TDS-535-2).

Antenna Specifications

TDS-535 Tuned Dipole Set
Included equipment
TSC-535 Transit Storage Case
FCC-1 Tuned Dipole Antenna 25 MHz - 70 MHz
FCC-2 Tuned Dipole Antenna 65 MHz - 180 MHz
FCC-3 Tuned Dipole Antenna 170 MHz - 340 MHz
FCC-4 Tuned Dipole Antenna 325 MHz - 1000 MHz
SAC-213-10 Ten Meter cable
Extension elements (qty 4)
Telescoping elements (qty 2)
Balun Mounting Clamp
Tape Measure
Case Size: 28" x 23" x 7"
Weight: 19 lbs.

Additional Resources

TDS-535 Tuned Dipole Set

Product Datasheet

Operation Manual

Tuned Element Lengths

Frequency to Wavelength Calculator

Shipping Information:
Carton size: 33" x 25" x 12"
Shipping Weight: 30 lbs.
* These are approximate dimensions and will vary depending on other items ordered.

Recommended Accessories

TDS-535 Tuned Dipole Set
Plastic Tripod

ATU-514 - Plastic Tripod

The ATU-514 is a collapsible tripod is built with all non-metallic materials that will not influence your antenna measurements.


Az and El Head

AEH-510 - Az and El Head

The AEH-510 Azimuth and Elevation head is used to assist the test engineer in pointing the mounted test antenna towards the device under test. This adjustable antenna mount has a rugged 4" mounting surface with a Captive 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas.


Tripod Carrying Case

TCC-511 - Tripod Carrying Case

Soft tripod carrying case to house and protect any of the tripods and extension legs that we offer.