Below is a comparison of the different versions of our monitoring RF current probes that we offer and their unique features.
View the listing of RF Current Probes.
BCP-610 | BCP-611 | BCP-615 | BCP-620 | |
Frequency | 20 Hz - 20 MHz | 10 KHz - 150 MHz | 10 KHz - 500 MHz | 10 KHz - 500 MHz |
Aperture | 1.25" | 1.25" | 1.25" | 1.25" |
Max Current (up to 60 Hz) | 800 Amps | 800 Amps | 400 Amps | 200 Amps |
Max Current (at 400 Hz) | 400 Amps | 450 Amps | 350 Amps | 200 Amps |
Max Current CW | 220 Amps | 4 Amps | 80 Amps | 40 Amps |
Peak Pulse Current | 5,000 Amps | 100 Amps | 100 Amps | 60 Amps |
Zt (nominal) | 0.025 ohm | 1.0 ohm | 1.0 to 5 ohms (1 MHz to 500 MHz) |
1 to 5 ohms (above 150 KHz) |
webpage | details | details | details | details |
BCP-614 | BCP-618 | BCP-619 | |
Frequency | 10 KHz - 300 MHz | 100 KHz - 500 MHz | 100 Hz - 100 MHz |
Aperture | 2.6" | 2.6" | 2.6" |
Max Current (up to 60 Hz) | 500 Amps | 350 Amps | 800 Amps |
Max Current (at 400 Hz) | 500 Amps | 350 Amps | 300 Amps |
Max Current CW | 2.3 Amps | 60 Amps | 50 Amps |
Peak Pulse Current | 100 Amps | 60 Amps | 30,000 Amps |
Zt (nominal) | 1 ohms | 8 ohms | 0.005 ohms |
webpage | details | details | details |
ICP-621 | ICP-622 | |
Frequency | 10 KHz - 100 MHz | 1 MHz - 500 MHz |
Aperture | 1.5" | 1.5" |
Max Input Power | 100 watts * | 200 watts * |
Max Current | 26 Amps | 50 Amps |
Turn ratio | 3:1 | 1:1 |
webpage | details | details |
* The maximum power limit specified is for a time limit of 30 minutes. Power greater than the specified limit may be used with care, using a shorter than 30 minute time period to limit temperature rise. Also, the RF current through the coil should be monitored to prevent thermal failure. Recommended maximum temperature rise: 35 dgrees C, maximum core temperature 80 degrees C.