Product Description
The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- .5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with 1/4-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.
Included parts:
- SAS-581-10 Antenna with attached waveguide to coax adapter and tripod mount
- Antenna Calibration Manual
* Calibration data and certificate at 1 and 3 meter horizontal polarity included
Specifications
| Frequency Range: |
1.70 GHz - 2.60 GHz |
| Antenna Factor: |
25 to 28 dB/m |
| Gain: |
10 dBi |
| Maximum Continuous Power: |
500 W |
| Beamwidth E-plane: |
65° |
| Beamwidth H-plane: |
45° |
| Impedance: |
50 ohm |
| VSWR: |
1.3:1 (1.6:1 max) |
| Connector: |
WR-430 to N-Type female adapter |
| |
|
| Physical Dimensions: |
| Length: |
14.5 in. (37 cm) |
| Width: |
4 in. (10 cm) |
| Height: |
8 in. (20 cm) |
| Weight: |
10.5 lbs. (4.76 kg) |
The information provided below is for general informational purposes only and should not be relied upon for any specific purpose.
