Standard Gain Horn Antenna

Model: SAS-585

8.2 GHz to 12.4 GHz

The SAS-585 X-band horn antenna operates at the 8.2 and 12.4 GHz frequency range with 15 dBi nominal mid-band gain and a typical VSWR of 1.3.

Features

8.2 GHz to 12.4 GHz
Individually Calibrated at 1 Meter Horizontal Polarity
FCC, MIL-STD, CISPR and TEMPEST Testing
Rugged Construction
Three Year Warranty

Datasheet Manual

Availability Only 1 left in Stock
(typical Lead time: 8 to 12 weeks)

The availability information was last updated on 10-Jul-26. This availability is subject to prior sale.

Product Description

The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- 0.5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with 1/4-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.

Included parts:

SAS-585 Antenna with attached waveguide to coax adapter and tripod mount
Antenna Calibration Manual

* Calibration data and certificate at 1 meter horizontal polarity included

Shipping Information:
Carton size: 13" x 10" x 7"
Shipping Weight: 3 lbs.
* These are approximate dimensions and will vary depending on other items ordered.

Specifications

Frequency Range:	8.2 GHz - 12.4 GHz
Antenna Factor:	34.6 dB/m
Gain:	15.6 dBi
Maximum Continuous Power:	250 Watts
Max Radiated Field:	500 V/m
Beamwidth E-plane:	30°
Beamwidth H-plane:	30°
Impedance:	50 ohm
VSWR:	1.3:1 (1.5:1 max)
Connector:	WR-90 to N-Type female adapter
Mounting Base:	¼ - 20 Thread, female
Physical Dimensions:
Length:	7 in. (17.8 cm)
Width:	2.1 in. (5.33 cm)
Height:	2.8 in. (7.11 cm)
Weight:	0.6 lbs. (0.27 kg)

The information provided below is for general informational purposes only and should not be relied upon for any specific purpose.

Plastic Tripod

ATU-514

The ATU-514 is a collapsible tripod is built with all non-metallic materials that will not influence your antenna measurements.

ATU-514

Product Details

Az and El Head

AEH-510

The AEH-510 Azimuth and Elevation head is used to assist the test engineer in pointing the mounted test antenna towards the device under test. This adjustable antenna mount has a rugged 4" mounting surface with a Captive 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas.

AEH-510

Product Details