Product Description
The A.H. Systems' SAS-510-4 antenna is lightweight, compact and has been manufactured to ensure maximum gain, low VSWR and high power handling capabilities. Whether testing inside a shielded enclosure or outdoors, this antenna will display efficient performance characteristics through its frequency range.
For certain applications where an increased dynamic range is required, an optional preamplifier (PAM-0204) may be used to increase the total system sensitivity.
* Calibration data and certificate at 1, 3 and 10 meter horizontal polarity included
Applications:
- Electromagnetic compatibility (EMC) testing
- Surveillance and signal intelligence (SIGINT)
- Communication system development and testing
- RF field measurements
- Military and industrial RF applications
Specifications
| Frequency Range: |
290 MHz - 4000 MHz |
| Antenna Factor: |
15 - 37 dB/m |
| Gain: |
6.2 dBi |
| Maximum Continuous Power: |
1000 Watts |
| Maximum Radiated Field: |
200 V/m |
| Pattern Type: |
directional |
| 3dB Beamwidth (E-Field): |
41° |
| 3dB Beamwidth (H-Field): |
100° |
| Impedance: |
50 ohm |
| VSWR: |
1.65:1 typ. (2.5:1 max) |
| Connector: |
N-Type, Female |
| Mounting Base: |
¼ x 20 Thread, Female |
| Physical Dimensions |
|
| Length: |
23.8 in. (60.4 cm) |
| Width: |
20.1 in. (51.1 cm) |
| Weight: |
1.5 lbs. (0.68 kg) |
The information provided below is for general informational purposes only and should not be relied upon for any specific purpose.
24 dB Preamplifier
PAM-0204
With at least 22dB of gain, this preamplifier will improve overall system sensitivity. Designed to meet the needs of your various testing requirements.
Product Details
Plastic Tripod
ATU-514
The ATU-514 is a collapsible tripod is built with all non-metallic materials that will not influence your antenna measurements.
Product Details
Plastic Tripod
ATU-514
The ATU-514 is a collapsible tripod is built with all non-metallic materials that will not influence your antenna measurements.
Product Details
Az and El Head
AEH-510
The AEH-510 Azimuth and Elevation head is used to assist the test engineer in pointing the mounted test antenna towards the device under test. This adjustable antenna mount has a rugged 4" mounting surface with a Captive 1/4-20 male thread for mounting all of A.H. Systems and most other compliance measurement antennas.
Product Details
3 Meter N/N Cable
SAC-211
3 Meter RF cable with N(m) to N(m) connectors. Custom lengths can be made to suit your specifications.
Product Details